| DIAMOND |
VM
Standard or Vitreous Metal Bond |
CBN |
- Size Range: .020" - 1" Diameter
- Application: Grinding carbide
- Coolant: Synthetic coolant recommended on wheels 1/2" and larger.
- 20 to 1 ratio
|
- Grey in color
- Cutting Speed: 1,000 to 3,000 S.F.P.M.
- Cannot be conventionally trued, wheels shipped ready to use
- Wheels should be indicated within .0005" T.I.R. prior to grinding
|
- Size Range: .020" - 1" Diameter
- Application: Grinding tool steels hardened 50 Rockwell "C" or above
- Coolant: Oil or water soluble oil recommended on wheels 1/2" or larger.
- 8 to 1 ratio
|
| DIAMOND |
M
Metal Bond |
CBN |
- Size Range: .030" - 3" Diameter
- Application: Grinding ceramic and glass
- Coolant: Synthetic coolant recommended
- 20 to 1 ratio
|
- Bronze in color
- Cutting Speed: 4,000 to 6,000 S.F.P.M.
- Cannot be conventionally trued, wheels shipped ready to use
- Wheels should be indicated within .0005" T.I.R. prior to grinding
|
- Size Range: .030" - 3" Diameter
- Application: Soft and case hardened steel
- Coolant: Oil or water soluble oil
- 8 to 1 ratio
|
| DIAMOND |
B
Resin Bond |
CBN |
- Size Range: .3/32" - 3" Diameter
- Application: Grinding carbide, ceramic or glass
- Coolant: Not required. However, if desired, synthetic coolant is recommended
- 20 to 1 ratio
|
- Light Brown in color
- Cutting Speed: 4,000 to 6,500 S.F.P.M.
- Wheels shipped ready to use
- Wheels should be indicated within .0005" T.I.R. prior to grinding
- May be trued with nibs designed for superabrasives followed by a dressing stick
|
- Size Range: 3/32" - 3" Diameter
- Application: Grinding tool steels hardened 50 Rockwell "C" or above
- Coolant: Not required. However, if desired, use oil or water soluble oil
- 8 to 1 ratio
|
| DIAMOND |
V
Vitrified Bond |
CBN |
- Size Range: 1/8" - 2" Diameter
- Application: Grinding carbide
- Coolant: Synthetic coolant recommended for wheels over 2"
- 20 to 1 ratio
|
- Dark Grey in color
- Cutting Speed: 4,000 to 6,000 S.F.P.M.
- Wheels may be trued in the machine by cluster or impregnated diamond tools
|
- Size Range: .1/8" - 2" Diameter
- Application: Grinding steel
- Coolant: Oil or water soluble oil recommended for wheels over 2"
- 8 to 1 ratio
|
| DIAMOND |
BM/DM
Plated |
CBN |
- Size Range: .015" - 3" Diameter
- Application: Grinding carbide, ceramics, glass, fiberglass, and abrasive composites
- Coolant: May be used without a coolant, only a spray mist of synthetic needed if desired.
|
- Metallic grey to shiny silver in color
- Cutting Speed: 4,000 to 6,000 S.F.P.M.
- Single layer plated products cannot be trued
- Wheels should be indicated within .0005" T.I.R. prior to grinding
|
- Size Range: .015" - 3" Diameter
- Application: Grinding stainless steel, exotic super-alloys, and tool and die steels hardened 55 Rockwell "C" or above
- Coolant: May be used without a coolant, only a spray mist of oil or water soluble oil is recommended
|
| Carbide Internal Grinding Tools |
| |
- Solid carbide burr with diamond cut pattern and end cutting teeth
- Designed to machine mold and die steel hardened up to 60 Rockwell "C"
- Cutting Speed: 1,000 to 3,000 S.F.P.M. (One and one half faster for stainless steel)
- Wheels shipped ready to use; should be indicated within .0005" T.I.R. prior to grinding
- May be used without coolant. If desired, use a synthetic coolant.
|
|
